Cisco 10GBASE-LR SFP Module for 10-Gigabit Ethernet Deployments, Hot Swappable, 5-Year Standard Warranty (SFP-10G-LR=)

Product Information

The Cisco SFP-10G-SR-I is a multirate 10GBASE-SR, 10GBASE-SW and OTU2/2e module for industrial operating temperature range. This module also supports CPRI datarate options 3, 4, 5, 6, 7, 7a, 8. It supports a link length of 26m on standard Fiber Distributed Data Interface (FDDI)-grade Multimode Fiber (MMF). Using 2000MHz *km MMF(OM3), up to 300m link lengths are possible. Using 4700MHz *km MMF (OM4), up to 400m link lengths are possible. A SFP-10G-BXD-I device is always connected to a SFP-10G-BXU-I device with a single strand of standard SMF with an operating transmission range up to 10 km. S-Class" is a somewhat confusing standard Cisco introduced a couple years ago . It could be seen as the "budget" standard - it costs significantly less than other multigigabitSFP+ standards, but also has a reduced feature set. The idea was to create transceivers that only incorporated the features most commonly seen in enterprise and data center applications.

Whenever you see -X, that means it has extended ability to operate under wider temperature variation, from-40°C to 85°C(-40°Fto 365°F). There is no other significant difference from the standard versions, and no reason to use -X equipment unless you're operating in extreme temperatures. The SFP and SFP+ formats are a wonderful invention, allowing a single piece of hardware - like a switch or firewall - to accommodate a wide variety of cable and connection types, simply by swapping out the connector being used. Unfortunately, this also means that finding the rightSFP/SFP+ transceiver for your application can sometimes be confusing and difficult, because of just how many connection types exist. The Cisco SFP-10G-ZR-I is a multirate 10GBASE-ZR, 10GBASE-ZW, and OTU2/OTU2e module for industrial operating temperature range. The SFP-10G-ZR-I has a limiting electrical interface receiver, which does not require EDC PHY on the host board, it can be plugged into any SFP+ port. It supports link lengths of up to 70 kilometers on standard Single-Mode Fiber (SMF, G.652), assuming a fiber chromatic dispersion of 20ps/(nm *km). This interface is not specified as part of the 10 Gigabit Ethernet standard and is instead built according to Cisco specifications. The SFP-10G-ZR-I has a cold start at -40⁰C; the transceiver will be operational except optical traffic is not supported from -40⁰ to -28⁰C, all other low speed features (DOM, I2C, etc.) are operational. The module is fully operational from -28⁰C to 85⁰C. The SFP-10G-BX40D-I and SFP-10G-BX40U-I SFPs support Digital Optical Monitoring (DOM) functions according to the industry-standard SFF-8472 Multisource Agreement (MSA). This feature gives the end user the ability to monitor real-time parameters of the SFP, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage.The Cisco SFP-10G-SR series has 2 other important modules: the Cisco SFP-10G-SR-X Module and the Cisco SFP-10G-SR-S Module. While the Cisco SFP-10G-SR-S module is a part of the Cisco S-class optics it matches the Cisco SFP-10G-SR module in performance. Information about Cisco’s environmental sustainability policies and initiatives for our products, solutions, operations, and extended operations or supply chain is provided in the “Environment Sustainability” section of Cisco’s Corporate Social Responsibility (CSR) Report. Deze apparatuur mag alleen worden geïnstalleerd, vervangen of hersteld door bevoegd geschoold personeel. LRM transceivers are often mistaken for 10GBASE-LR SFP+ optics, but it is not the same. 10GBASE-LRM SFP+ makes use of the 1310nm lasers, however, it has a maximum reach of only 220 m over standard multimode fibers such as OM3/OM4. This transceiver is available in the XFP and SFP+ form factors. The Cisco 10GBASE-ER Module supports a link length of up to 40 kilometers on standard Single-Mode Fiber (SMF, G.652).

The Cisco SFP-10G-LR-X is a multirate 10GBASE-LR, 10GBASE-LW, and OTU2/OTU2e module for extended operating temperature range. It supports a link length of 10 kilometers on standard Single-Mode Fiber (SMF, G.652).Bare opplært og kvalifisert personell skal foreta installasjoner, utskiftninger eller service på dette utstyret.