Lithofin MN Builders Clean 1L

Product Information

If you are not satisfied with the result, repeat this procedure either with a stronger concentration or with longer working times. Coverage: 20-50m 2 with a watering can; up to 200m 2 with a low-pressure sprayer. A sprayer is preferable, to allow for better coverage and penetration. In case of spill or other release, take up with absorbent material (e.g. sand, sawdust, general-purpose binder). Product does not burn, fire-extinguishing activities according to surrounding.

Strict EU regulations were introduced in 2013 to ensure all paving sold in the UK meets the minimum standards set out under European standards EN1341 (flagstones), EN1342 (setts) and EN1343 (kerbs), however MOST companies selling paving online DO NOT adhere to these legal requirements as it is not heavily policed by Trading Standards. ALL paving products sold by Paving Superstore are manufactured by leading brands and DO meet these standards. All products are CE marked / UKCA / UKAS accredited. UKAS is the National Accreditation body for the United Kingdom appointed by the government to ensure products meet the high standards needed to attain certification. All products also hold a valid Declaration of Performance certificate which details the tests and results for each of the necessary criteria which guarantees you that the products we sell are fit for purpose. Water Absorption (BS EN 13755) Lithofin MN Builders Clean is a highly active cleaner that contains the optimal combinations of different kinds of acid, rust preventing and cleaning agents. Comes in 1 Litre bottles. Ensuring paving has good slip resistant qualities is important for outdoor usage, especially when used by children or elderly people. There is no point installing stone that does not meet the specified criteria for outdoor surfaces as it will be dangerous and not at all suited to purpose.Step 4 - once you are on our quote system, simply complete the form on the right hand and send over your request Bero chemically changes the rust particles in the stone, so removing the marks and keeping further occurrences under control. It also removes cement residues and similar dirt. Looking for a price on a product which says POA. Its simple and easy to do with our online Quote Request System. Simply follow the below steps and your quote will be compiled by one of our dedicated team members. Please Note: Lithofin MN Builder’s Clean is not suitable for polished or finely honed surfaces which are sensitive to acid such as limestone, marble, manufactured stone, etc. Lithofin Bero is an acid-based cleaner for rust marks. An alkaline formulation like Lithofin Rust-Ex should be used for limestone.

Ideally, use Outdoor Cleaner once a year to get a really thorough deep clean. This should take you through to the autumn when a re-application of Algex will protect your patio from the worst of the winter. The only caveat we need to offer is that Outdoor Cleaner shouldn't be used on stone which has been sealed with Dry Treat Intensifia, as it can sometimes lead to bleaching. Lithofin Outdoor Cleaner is an all-purpose solution suitable natural stone patios, including limestone. The flexural strength is important as it ensures the paving is not overly brittle which would cause difficulties when handling and laying. Compression Limits (BS EN 1926 Lithofin MN Builders Clean dissolves and removes cement and mortar residues, efflorescences, limescale deposits, stubborn ingrained dirt, rust and rust discolourations. The yellowish discolouration which results from iron containing stones rusting is removed and largely prevented. Slip resistance testing is a complex and varied area however the two main tests for domestic paving are either the pendulum test (PTV) or the ramp test (R rating). With the pendulum test, a pendulum is swung over the surface of the stone which will slow it down. The rougher the surface, the more it will slow the pendulum and the higher the value (PTV). It is tested both wet and dry. The lowest permitted value for external use when wet is 36.

Reducing the need to clean

Dilute Lithofin ASR up to approx. 1:3 to 1:5 with cold water, apply it to the surface and allow it to work for approx. 5 to 15 minutes. Brushing increases the effectiveness of the product.

The good news is that limestone, being generally dense, seldom needs cleaning, but what can you do if it does? A common problem is the misuse of acid cleaners. This has a detrimental and irreversible effect on the look of limestone paving. Always choose a cleaner that specifies that it is suitable for limestone. Need advice?Lithofin OIL-EX is a ready-to-use, gel-like paste that we recommend for spot-cleaning oil- and grease-based stains, including those that are deeply ingrained. Consisting of a mixture of solvents and highly absorbent solids, the paste consistency allows the active ingredients to work on the substrate for a long time. It dries to a powder that can then be brushed off. Other products can still be split down for you, but cannot be calculated online. For these, follow the on-screen prompts. In summary: General grime and dirt – a Stone and Masonry Cleaner (SMC) can be used to give your patio a deep clean.